1·It then ships the gas 200 miles by pipeline to Canada, where it is pumped underground in oil recovery operations.
然后它通过管道将天然气输送到200英里外的加拿大，在那里的地下压泵进行采油作业。
2·Will this new oil recovery technique be financially feasible?
从金融方面看，这项石油回收新技术可行吗？
3·Thermal recovery is the most effective methods for heavy oil recovery.
热力采油是稠油开采最有效的方法之一。
4·This technique has broad application prospects in tertiary oil recovery.
在三次采油中，该项技术有广阔的应用前景。
5·Nitrogen foam thermal flooding is a new method for enhanced oil recovery of heavy oil.
氮气泡沫热力驱是一种新的提高稠油油田采收率的方法。
6·The experimental results show that the displacing agent m can greatly enhance oil recovery.
实验结果表明，M驱油剂可大幅度提高水驱原油采收率。
7·Polymer flooding technology enhances oil recovery by increasing the sweep efficiency of water.
聚合物驱油技术是通过提高水的波及系数提高原油采收率。
8·The pattern of injection and production wells used in waterflooding and enhanced oil recovery.
在注水开发和强化采油中所采用的由注入井和生产井组成的井网。
9·The diverting effect of WG in pores can improve the microscopic swept efficiency and oil recovery.
弱凝胶的流体改向作用是提高微观波及效率和采收率的主要因素；
10·For both vertical and horizontal well systems, oil recovery decreases with increasing mobility ratio.
无论垂直井还是水平井系统，采收率都随流度比的增加而减少。
1·It then ships the gas 200 miles by pipeline to Canada, where it is pumped underground in oil recovery operations.
然后它通过管道将天然气输送到200英里外的加拿大，在那里的地下压泵进行采油作业。
2·GlassPoint, a small Californian company, thinks it can make steam for oil recovery more cleanly and cheaply by using sunshine to do the heating.
加州的一家小公司- - -玻璃点太阳能公司认为，通过使用阳光来加热，它能为采油生产更清洁和更便宜的蒸汽。
3·An enhanced oil recovery technique in which an inert gas such as carbon dioxide or nitrogen is injected into a depleted oil reservoir.
向衰竭油层注入惰性气体(二氧化碳或氮气)的一种强化采油法。
4·Vibration blocking removal technologies, acid fracturing technique, steam injection, water injection were generalized successfully in oil recovery process.
在采油生产中已成功推广了振动解堵、酸化压裂解堵、注蒸汽、注水等增产技术。
5·The method used in enhanced oil recovery to keep the mobility of the displacing fluid or bank equal to or less than that of the displaced fluid or bank.
在强化采油中所用的一种方法。它使驱动流体或流体带的流度保持等于或小于被驱流体或流体带的流度。